How to Replace Door Locks

The replacement of your door lock can be a tricky task. It is important to keep your home secure from intruders, and to change double glazing window locks repairs if you have an additional housemate or have let out your home.

Most new locks are designed for standard door widths. If your door is more thick, you will need a "thick-door" kit that has longer screws and longer tail pieces for the deadbolt.

The old lock can be removed

You'll need to take your old door lock from the door before you can install the new lock. This can be accomplished with a few basic tools, but it's important to take care not to harm the door or frame. Utilizing the right tools will aid in avoiding costly repairs in the future.

Start by taking off the screws that hold the handle and trim. You can use a screwdriver accomplish this. Once the screws are removed, you can take off the trim. Then, you can access the screw that secures the handle and trim to the door. After removing the screw then, you can take off the lock cylinder and then open the handle.

One of the most common indicators that your lock is getting old is when you cannot longer move the key inside. This is because the tumblers wear out and eventually stopping their movement upwards or downwards, causing the lock to cease to function. You'll need to get the lock changed by a locksmith if this occurs.

Begin by removing the screws that hold the faceplate in position. If your kit doesn't include new screws, you should purchase them at a hardware store. If you're installing a mortise lock, you must also remove the screws that secure the external rose plate to the door. After you've removed all screws, remove the dead bolt and the plate away from the door.

Then, search for a pinhole on the interior trim of the handle. If you find a hole you can insert a straightened safety pin into it. You can also employ a flat screwdriver press against the depression. This will release the handle and expose screws that can be removed to take the entire lock case from the door.

Fitting the new lock

Installing a new lock can be done with ease regardless of whether you need to replace your lock following an attack, or just want to improve your door's appearance. However, it's important to measure the door in order to ensure that you purchase the right lock that is the correct size for your door. This is particularly crucial for deadbolt locks that must be a specific size to fit in the bolt pocket and strike plate. If you're not sure of how to measure, you can get help from your local hardware store or locksmith.

If you're replacing mortice locks, make use of the existing centre rail as a guide for positioning the new mortise lock. Once you've marked the location of the lock, you'll need to drill holes along the centre line to the same size as the lock. After that, chisel the wood away until you have a rectangular space to accommodate your mortice lock. After that, insert the lock and outline the faceplate using the marking knife. Mark and drill screwholes to secure the ace, make sure the latch plate's interior lines up with the mortise hole for a secure fit.

Be cautious not to tighten too much the lock when installing it. This can cause the lock to rattle or even break. If you have a lock that is keyed ensure that the spindle is aligned with the hole in the knob. If it's not, make use of the screwdriver to drive the lock into the knob.

After you've installed the new window lock repairs near me, it is now time to install the decorative base plate that is included with it. If the lock doesn't come with an appropriate base plate you can buy one that matches the hardware.

The last step is to test the lock to ensure that it is working. This can be done by inserting the lock's key and turning the window lock replacements to make sure that it is able to open. If it isn't working then you must contact locksmith.

You can also avoid burglaries by having professionals rekey your locks. This involves changing the internal tumblers of your lock to make it unreceptive to your old keys. This will ensure that your home is safe and provide you with peace of mind.

Test the new lock

When you are installing a new lock you must ensure that it functions as you intended. This is why it's important to follow the guidelines carefully. You may not be able to open your door if you don't. You can call a locksmith for assistance in case you aren't sure what to do. A locksmith can provide advice on the best locks for your house.

If you're having trouble opening your lock, it may be a problem with the latch or handle. You can lubricate the latch with graphite, or spray it with WD-40. This can sometimes solve the issue. However, you may have to replace the latch completely if it's not working correctly.

The lock may have been installed incorrectly. The door handle clip is often broken or missing from the new lock. In this instance it is recommended to remove the handle from inside and insert a retainer clip. The handle can then be attached to the lock and the lock tested.

After you've changed the lock, it's important to test the keypad to make sure that it's functioning correctly. You can test the keypad by inserting it and turning it. If the keypad is functioning properly, it should unlock and lock your door.

It is also advisable to check the deadbolt lock to determine if it's functioning correctly. If it's not working, remove the latch from the door and remove the Phillips-head screws. Replace the deadbolt you have used with the new one. Place the deadbolt in the proper direction and load the lock in the correct way.

Spindle testing is an additional method to test the new lock. This can be done by inserting a screwdriver in the spindle. This test should be carried out before re-installing the lock to prevent any mistakes during installation.