Cat flaps let your cat leave and come back as they please without you needing to let them in or out. They also help stop your cat from urinating in the house.

It is much easier to put the cat flap on a upvc panel than on a glass one however, Fitting Cat Flap In Upvc Door Panel you'll require some expertise and right tools.

Take a measurement of the door

fitting cat flap in upvc door panel (inquiry) a cat flap in the door isn't easy but as long as you use the correct type of cat flap be patient and follow the directions provided, it shouldn't be too much trouble. We will demonstrate how to draw the shape and then use a jigsaw in order to cut the door area. Then, we'll finish the job by attaching the flap. This will ensure the flap is in place and also protects the doors from the damage caused by rain and wind.

To determine the size of the cat flap you require, take a measurement of your pet's width. This will allow you to select a flap that is big enough for your pet to enter the house and exit without needing to open the door every time.

Once you have the measurements you can mark out the location on the door where the template should be placed, usually this is done with an X, but some kits include a drawing that shows where to drill. If yours does, then you can stick it to the door and use a pencil to draw around it. If your door has moulding or a sill at the bottom, be sure you leave plenty of space between your cat and the moulding or sill.

Put on your eye protection and dust mask, and using a jigsaw begin to cut according to the lines you penciled in, don't try to push the blade too hard, as this could make it cut faster than you want it to. Use a set square to ensure that you are cutting the material in a proper manner and that the hole is a rectangle. When you are happy with the result, you can remove the remaining door material.

Draw a Line

The cat flap allows you to let your pet inside and outside without having to worry about unwanted visitors or unwelcome gifts. It also reduces drafts and helps to keep the temperature inside your home in a stable manner. However, installing the cat flap to your door could be an overwhelming task for those who haven't done it before. This can lead many people to seek out a professional carpenter or joiner to complete the task. This is an option but you can do it yourself if the tools are appropriate and the steps are followed.

While this is far easier to do when using a timber door it is still possible to do this in uPVC doors - although you should be careful not to scratch the doors, as this can invalidate your warranty. The first step is to take measurements of the door, making sure that it will fit the new cat flap. If you have a standard upvc cat flap door panels panel it's easy. However, if your door is composite or another type of door, you may have to be more cautious.

The next step is to determine the belly height of your cat. This is the distance from the floor to the underside of the cat's stomach, and you will need to find a spot near the door whereut removing more than this can cause problems or damage the doors frame.

A upvc door may contain a metal frame or a panel inside that could interfere with the microchip cat flap in this case you will need to cut an over-sized hole to ensure that the metal does not touch the wall of the cat flap. If this is done it is crucial to fill in the oversize gap and make it watertight.

If you're looking to install a cat flap into a double-glazed or upvc window with frames made of metal you'll need to talk to a specialist. They will provide you with a brand new piece of glass with the hole already made for the cat flap. It is much less expensive to have this done than to attempt to fix the cat flap onto an existing pane of glass that hasn't been designed specifically for the purpose.

Fit the Flap

Cat flaps allow your pet the freedom to come and go whenever they want and allow them to be comfortable in the house when they'd like. However, if you own an uPVC door it can be difficult to put in a cat flap cover for winter flap, especially if you don't own glass panes that can be cut to accommodate one. If you are willing to install a half-glazed uPVC replacement panel, it is possible to install the cat flap. It's not a simple matter of drilling an opening in the door. You'll also have to perform a few steps to ensure that it is secure.

A composite, uPVC or GRP door panel is typically comprised of a plastic skin that is bonded to an insulating polystyrene base. The material is fairly fragile and care should be taken when cutting into it to avoid damaging. This type of door typically has a template which you can use as a reference to cut the hole into your door.

Once you have marked the location of the hole in your door, it's time to put in the cat flap. You can purchase and install various models including basic push-button operated models to ones that are activated by microchips that allow access only to your pet. However, regardless of what kind of cat flap you select, Fitting cat flap In upvc door panel it is essential to ensure that your cat can comfortably use the flap and not get trapped outside in bad weather.

It's a good idea select circular fittings rather than one that is square, since circles can be more securely cut into the door glass. This is because square holes can leave the glass vulnerable to cracking if a drill is used on it. This is also a safer choice because you won't need to drill into the toughened glass that could break and cause harm to your pet or your family members. This is especially important if you have a young or elderly person in your home who could be injured by shards glass.