Sash Window Locks With Key

Sash windows aren't always secure. The simple center catches that are found on a majority of windows in sash can be easily opened with the help of a screwdriver or knife.

There are a variety of ways to increase security while maintaining the traditional appearance of a timber sash window. Some of the most unobtrusive options are opening restrictors, barrel fasteners, and Brighton sash bolts.

Sash stops

Installing the security lock on an old sliding sash windows frame timber window with a sash can be a great solution to prevent children from opening the window and climbing in. You can do this project yourself and it's cheap.

There are a myriad of alternatives available for locking your windows in sash, however we would recommend the Migstop restrictor by Mighton. This is a spring-loaded device that can be locked either open or closed with the use of a key. It will also prevent the window from moving beyond a certain limit, which is great if you have young children.

To put the fastener in place, start by closing and locking the window. Mark the location of the hole with a pencil on both sides of the frame. Then drill the holes. After you've drilled the holes, put the fastener in place and screw it down using the screws supplied. Test the fastener and make sure it closes and can be opened easily.

Sash stops are fitted to the upper sash and stop the sashes from sliding on each other. They are not noticeable and easy to fit but are only effective when they are installed in the right position within the window. To increase security, you can also add sash bolts, which are more difficult to remove, however they require you to use an ignition key to open them.

These bolts are inserted through the top and bottom of the upper sash, preventing them from being opened. They are available in two forms: protruding bolts that can only be removed using an instrument or pick bolts that can be extracted. They can be utilized with stoppers for sash that are fitted to the frame to allow an opening gap of up to 100mm. This allows fresh air to flow in without risking breaking-in.

Another option is to install a frame to frame lock that sits on the bottom of the lower sash, and at the at the top of the upper sash. They can be opened by the use of a key and are more secure than sash stops, but they may not be suitable for those who are disabled or are unable to operate an ordinary sash window.

Sash bolts

A sash bolt is among the easiest and least expensive ways to secure windows with sash. They are placed between the inner and frames that surround them to stop the sash from being forced open. They are easy to fit and are available in a range of sizes to fit most windows with sash. You should always fit them in pairs to give the most protection. They also make a great alternative to the standard locks that hold the sashes in place although you should still pin your windows to ensure maximum security.

A sash-window bolt is made out of brass and has an elongated casing that is drilled into the lower sash. A bolt is then screwed into it and secured with the key. The bolt secures the ct an experienced and reputable company for your installation project or replacement. Review the credentials, reviews and social networks as well as the accreditations of a business to ensure you receive the best service. It's recommended to get quotes from multiple companies to compare pricing and service. It is crucial to test the new fasteners after they have been installed to ensure that they function according to their intended purpose and are secure.

Another option is to use a child-proof lock for sash windows. They can be used to stop children from opening the window and are available in a variety of colors and sizes. Certain levers rotate around a quarter-circle to locate a catch that is mounted on the lower frame of the window. This type of fastener is usually mounted high enough that a child isn't able to reach it with their hands.

While locks on window screens might make you feel safer, they are not enough to deter determined burglars. These locks are not designed to stop children from falling through windows and shouldn't be relied upon to do so. Instead, you should opt for a window sash lock that allows for ventilation, but is difficult to open without a key. These sash window lock types are also called dual screw locks. They have the bolt that is inserted into the hole in the middle of the sash, and another bolt that fits in the hole in the casement frame. They are easy to install and offer greater security than a sash stop.

Keyed sash locks

Traditional sash windows may seem easy for criminals to break into, but you can take steps to prevent them from happening. The best way to begin is to get them assessed and repaired by a professional who will make sure that they're operating properly and are fitted with security features. This will make it much difficult for criminals to gain entry into the premises, and they'll probably quit and look for an alternative target.

Another great idea is to install sash stops inside the frame, since they prevent the window from opening beyond a certain level. They can be placed on either side of the frame and are available in both protruding and not-protruding models. They're simple to install and are usually made from zinc diecast with white-painted finishes. They're also extremely durable, and can be locked with keys.

There is also the option of adding sashbolts to your frame in addition to sashstops. Bolts are used to pass through the hole of the inner sash and into the slot on the outside of the frame. The bolts stop the sash from being pulled open. They can be installed as a pair to offer the maximum level of security.

They will not only increase your energy efficiency but also improve the security of your sash window. They prevent the sash being pulled out, which helps reduce drafts and heat loss. You can find these bolts in protruding and non-protruding versions, and you can buy them by themselves or in sets.

It is not wise to depend on these security measures alone as criminals are always able to find ways to circumvent them. Therefore, it is essential to install a solid-core door and make sure that your locks are working correctly. This will stop criminals from entering your home and give you security. It is recommended to have professionals install new sashlocks in order to ensure they are installed correctly and do not interfere with your windows' functionality. To have more peace of mind it is also possible to search for a company that has excellent reviews and social media.