Cat flaps allow your pet to move around whenever they want without you needing to let them in or out. They also can help to prevent your cat from toileting in the house.

Fitting a cat flap in a upvc door panels with cat flap door panel is much simpler than installing one in a glass door, however it does require some skills and the right tools.

Take a measurement of the door

Fitting a cat flap in a door can be tricky but as long as you use the correct type of cat flap be patient and follow the instructions provided it shouldn't be too much trouble. We will demonstrate how to draw the shape using an jigsaw to cut out the door area. Then, we'll finish the job by affixing the flap. This will ensure that the flap is in place and shields the doors from damage caused by wind and rain.

The first step is determine the width of your pet in order to get a precise measurement of the size of cat flap you'll need. This will enable you to choose a cat flap that is large enough for your pet to walk into the house and exit without needing to open the door every time.

Once you have the measurements, you can mark where on the door the template should be placed, typically this is done using an X, fitting cat flap in upvc door panel but some kits include a drawing that shows where to drill, if yours does, then you can stick it to the door and draw a line around it. If your door has sill or moulding on the bottom edge of it ensure you have enough space as this will keep your cat safe and prevent them gaining access to your home.

Put on your eye protection and dust mask, and using a jigsaw, begin to cut according to the lines you have pencilled in, but don't push the blade too hard because this will make it cut faster than you want it to. If you own a set square then use it to check whether you're cutting in the right way and to ensure that the hole is a good rectangular shape. Once you are satisfied with this you can begin to take off the rest of the door material.

Draw a Line

The cat flap is a great way to let your pet out and in without having to worry about them coming in with guests or leaving unwelcome gifts in the home. It also helps prevent draughts and keeps your home's temperature steady. Fitting Cat Flap In Upvc Door Panel a cat flap to your door can be a daunting task for those who haven't attempted it before. A lot of people will hire an expert carpenter or joiner to do the job. While this is certainly an option, it's possible to do the job yourself if you have the right tools and follow the instructions with care.

Although this is much simpler when using a timber door it is still possible to do this in uPVC doors, but you must be careful not to scratch the doors since this could cause damage to your warranty. The first step is to take measurements of the door, making sure that it can be able to accommodate the new cat flap. This should be easy enough if you are using a standard uPVC door, howeve parts. It is important to have some sandpaper on the ready to smooth any edges.

Once the line has been traced, you must cut the hole with a jigsaw, remember to wear any necessary safety equipment when working with an electric tool. If you're concerned about the noise, you can purchase an electric jigsaw that is quieter and more user-friendly.

It is essential to only cut away the material that is required to make the cat flap. A small amount of material will be needed to cover the thickness of the wall of the flap but removing more than that can cause problems or cause damage to the door frame.

If the door is made of upvc and has a metal panel or frame, it could interfere with the microchip flap. In this situation you'll need make an oversize hole to ensure that the metal doesn't come into contact with walls of the flap.

If you are fitting a cat flap into a upvc door or double glazed window with a frame made of metal, you will need to speak to a professional who can provide you with a brand new glass pane that already has the hole for the cat flap in it. This will be cheaper than trying to fit a cat flap inside an existing pane that was not designed for this purpose.

Fit the Flap

Cat flaps give your pet the freedom to move around whenever they like and let them relax at home whenever they'd like. If you've got an uPVC door, it may be difficult to put in an animal flap, especially when you don't have glass panes that can be cut to fit one. If you're looking to install a half-glazed uPVC replacement upvc door panels with cat flap panel, it is possible to add the cat flap. It's not as simple as just cutting a hole through the door however, and there are a few things you'll need first to make sure it's safe.

A composite, uPVC or GRP door panel is typically comprised of a thin plastic skin that is bonded to an insulating polystyrene base. It is essential to be cautious when cutting the material. This type of door usually comes with a template drawing that you can use as a guide to cut the hole in the door.

After you've marked the location of the hole in your door, it's now time to put in the cat flap. You can pick from a variety of options, from simple push-button units to microchip-activated ones that only let your pet in. But, regardless of the type of cat flap installer flap you choose it is essential to ensure that your cat can comfortably use the flap without getting trapped in the weather.

It's a good idea to choose circular fittings rather than one that is square, since circles are more securely cut into the door glass. This is because square holes are more likely to break the glass when drilled. It's also a safer option to use as you don't risk having to drill into toughened glass that might break and injure your pet or family members. This is particularly crucial if you have a child or elderly person in your home who may be hurt by shards of glass.