Cat flaps let your cat go inside and out whenever they want without having to let them in or out. They can also help keep your cat from having to go to the bathroom in the house.

Installing a cat flap in upvc door panel - visit here, flap on a door panel made of Upvc is much easier than in a glass door, but it requires some knowledge and the right tools.

Measure the Door

The installation of a cat flap inside the door can be a challenge however, as long as you choose the right type of cat flap, take your time and follow the steps provided it should not prove to be a problem. We will be showing you how to draw the shape, use a jigsaw to cut out the area in the door and then finish the job by fixing the cat flap to the door. This will ensure the flap stays in position and shields the doors from the damage caused by rain and wind.

To determine the size of the cat flap that you require, take a measurement of your pet's width. This will allow you to choose a cat flap that is large enough to allow your pet to enter the house and exit without needing to open the door every time.

Once you have the measurements you can mark where on the door the template should be positioned, usually this is done with an X, but some kits come with drawings that show where to drill, if yours does, then you can stick it to the door and use a pencil to draw around the door. If your door has moulding or a sill at the bottom, be sure that you leave enough space between your cat and these elements.

Next put on your eye protection and dust mask and using a jigsaw start cutting according to the lines you penciled in, don't try to press the blade too hard, as this could cause it to cut more quickly than you would like it to. Set the square with a ruler to ensure you are cutting the material properly and that the cut is a rectangle. When you are satisfied with the result, you can take out the rest of the door material.

Draw a Line

The cat flap lets you to let your pet in and outside without worrying about unwanted visitors or unwelcome gifts. It also helps prevent draughts and helps to keep your home's temperature steady. However, putting an animal flap on your door can seem like an overwhelming task for those who've never done it before, which is why many to hire an expert joiner or carpenter to do the job. This is a viable option, however you can do it yourself if your tools are right and the steps are adhered to.

Although this is much easier to do when using a timber door it is still possible to do this in uPVC doors - although you need to be very careful not to scratch the doors, as this can cause damage to the warranty. The first step in the process is to take measurements of the door, cat flap in upvc door panel making sure that it can be able to accommodate the new cat flap. If you have an ordinary uPVC panel it's easy. However when your door is made of composite or another kind ou are concerned about the sound produced by the jigsaw, consider buying a cordless version which is much quieter and easier to use.

It is important that you only cut away the material required for the fitment of the cat flap. It is necessary to leave a bit of material to cover the wall of the flap. However, removing too much can cause issues or even damage the door frame.

If the door is made of upvc and is made of metal, or has a frame, it may interfere with the microchip flap. In this scenario, you will need to create an over-sized hole to ensure that the metal doesn't get in contact with the wall of the flap.

If you're looking to install a cat flap inside windows made of double-glazed or upvc with frames made of metal you'll need to talk to an expert. They can offer you a brand new piece of glass with the hole that is already designed for the cat flap. It is cheaper to get this done rather instead of trying to install the cat flap cover for winter flap onto an existing pane of glass that was not designed specifically for the purpose.

Place the Flap

Cat flaps give your pet the freedom to go and come whenever they like, allowing them to relax in the home whenever they like. However, if you have a uPVC door, it may be difficult to install an animal flap, especially if you don't own a glass pane that can be cut to accommodate one. Luckily, if you're happy to purchase and install a replacement half-glazed uPVC panel then it is possible to add the cat flap to these doors. It's not as easy as making a hole in the door however, and there are a few things you'll need to take care of first to ensure that it's secure.

A composite, uPVC or GRP door panel is generally composed of a plastic skin that is bonded to an insulating polystyrene core. It is essential to be cautious when cutting the material. This type door comes with a template that can be used to cut the hole.

Once you've marked the hole in your front door, cat flap in upvc door panel it's time to install the cat flap. You can buy and fit many different models, from basic push-button operated models to microchip activated units that allow access only to your pet. However, no matter what kind of cat flap you pick, it's important to make sure that your cat flap install can comfortably use the flap without getting stuck outside in the rain.

A circular fitting is better than a square, because circles can be cut more securely into glass. This is because square holes are more likely to break the glass when they're drilled. It's also a safer choice to use since you don't risk having to drill into toughened glass that could shatter and injure your pet or your family. This is especially important if you have child or an elderly person living at home who could be hurt by shards of glass.