How to Replace a UPVC Door Replacement Lock

If your door lock is jammed or doesn't function in the way it should, you may want to replace it. It might seem difficult but the process is straightforward and doesn't require a locksmith professional.

Few basic tools, replacing upvc door lock some patience, and lots of care will suffice. Here's what you must do:

Measure the Door

It could be time to replace lock upvc door your uPVC doors if you are having trouble locking them or if they don't close. Whether you've recently moved house or a tenant has moved out without returning the keys or your multipoint gear box is showing signs of wear and tear, it's easy to change the barrel on your lock to an alternative that offers an extra layer of security.

Before you purchase a new lock, it is necessary to take key measurements that will ensure the new lock fits properly and doesn't compromise your home security. The most important of these is the backset. This is the distance between the center of your keyhole bore hole and the edge of your door. It's typically 2 3/8 or even 2 3/4 inches. Use a measuring tape or ruler to measure this and record the results on paper or a notepad.

You'll also have to know the faceplate's width. This is the amount of thickness the part covers the mechanism of the lock. If you can, buy an alternative lock from the same manufacturer, since they are manufactured to the same dimensions. If you are unable to locate the manufacturer's name or mark on the lock, measure the width of the cylinder. You can also measure the width of the cylinder by putting a pencil in the keyhole.

Once you have the dimensions then you can begin to remove the old cylinder. Begin by loosening the screw that holds the handle in place using a Phillips-head screwdriver, then loosen the screws that join the interior and exterior handles together. Once these screws are removed, you are able to remove the barrel screw located on the exterior handle and remove the cylinder.

If the cylinder becomes stuck in the lock, you can use WD-40, or another fluid. It is important to not try to force it out. The forceful turning of the cylinder can damage the internal gearbox of your lock. Consider upgrading to a lock that has anti-snap, replacing upvc door lock anti-bump and anti-snap security. This will help to make it more resistant to attacks from thieves.

Source the Lock

If you're replacing Upvc door lock an old lock after a break-in or upgrading to improve security There are a few points to bear in mind when choosing a new door lock. Make sure you've got the right size cylinder for your door, and that you purchase from a reputable manufacturer to ensure a good fit and high-quality. You'll need a few tools to complete the task, including the screwdriver and mallets made of rubber.
n uPVC door are prone to malfunction, and it is essential to maintain them on a regular basis. In fact, experts recommend that you change your locks every seven years. If your lock is severely damaged or you are not satisfied with its performance, a professional's assistance could be worth a look.

In most cases, a pin-based system referred to as a euro cylinder is utilized to construct uPVC doors. These are convenient to use and don't break down, but they can still be vulnerable to attack. It is therefore recommended to replace your lock with a more modern lock that is equipped with anti-snap, anti-bump and anti-snap protection to prevent burglary.

The first step to changing your uPVC locks is to remove the handle. This will expose the old cylinder. This can be a little difficult because there are often some screws hidden beneath the handles, so be sure you have a screwdriver in your bag. Next, you'll want to try moving the cylinder until it becomes loose. Once it loosens, you can take it out of its socket.

If you find an appropriate replacement then simply screw it into place and reverse the removal process. Be careful not to over tighten because this could cause the cylinder to get stuck in the door and stop working as it should. Once everything is back in place, test the uPVC door lock by opening and closing it both the inside and outside. You should now be able to lock and unlock the door with your key. If not, make sure that the screws are tightened, then try again.

Install the Lock

You'll have to do some research to make sure the lock you select is the right one for your door. You'll need to know your backset and faceplate dimensions - the distance between edge of the front door and the centre of the handle/cylinder - along with the lock type to ensure that the new lock is fitted correctly and does not compromise security.

After you've completed this, you're now ready to begin installing the new lock. You should ideally prop the door open or secure it so that it doesn't close during the installation process. To start, use a Phillips-head driver to loosen the screws holding the handle in place. After that you should be able to pull the inner and outer handle apart.

The next step is to remove the old cylinder, which is something you'll be able to do by taking it from its barrel. Once you've removed your cylinder and the barrel, you can install your replacement lock, ensuring that you follow the instructions for the particular model you have. After the lock has been installed, you can test it by opening and shutting the door from both the inside as well as the outside, and locking and unlocking it from inside, and then trying it again.

There are a variety of reasons you may need to change the locks on your replacing upvc door lock and handle door. You may have just moved in and not had a key. The previous tenant may not have returned it. You might also want to upgrade your lock to something more secure. It shouldn't take more than five minutes to change the lock cylinder.

No matter if your uPVC doors are equipped with single-point or multipoint locks, they all use the same basic mechanism. This means that they can be prone to problems at times that could result in them not being able to close or becoming stuck. These can be caused by wear and tear, weather conditions or simply due to everyday usage. Most of these problems are easily corrected with a little maintenance or by contacting a locksmith.