How to Do a Door Lock Change

Changing your door lock is an easy and affordable way to improve the security of your home. However, the process is not for everyone. It requires some skill and perseverance.

The cylinder is located within the knob's body. The cylinder is responsible to recognize the key when it is put into the lock.

Removal of the old lock

The first step to replace the door lock is to take out the old lock. It's a relatively straightforward process, however you must keep some things in mind. Make sure that the new lock fits the door. This will ensure that it is securely fitted and won't create a gap around the deadbolt or latch.

Once you have removed the latch plate, look for two bolts or screws on the inside of the casing that hold the casing and the halves of the lock together. Remove these screws with a screwdriver before removing the lock off the door. If you are using a mortise locking system there is a set screw that binds the handle to the spindle. Make use of a screwdriver for removing this screw, then remove the doorknobs.

You must also remove the latch and deadbolt plug from the hole in your door jamb. Install your new lock. If you are replacing a mortise lock you must also measure the distance between the lock case and the edge of your door to ensure that the new double glazed window lock repairs near me will fit.

You might want to change your lock for a variety reasons, for instance, the possibility that someone else has the key or if you have a new roommate. In any event, you can save money by removing the lock yourself rather than paying an expert to remove it. It's much easier than you think and can be accomplished in a matter of minutes.

Remove the trim and handle from your door. With a flat screwdriver pry off the trim. You should be able to twist off the majority of it. In some instances you might be able remove the handles completely. Then, check the handle for a small pinhole on the inside. Then insert a straightened paper clip into it. This will activate the release mechanism and allow you to remove the handle from the door. The next step is to look at the interior side of the lock for another small tab and press it using a flat screwdriver. Once the spindle is removed, you are able to remove the cylinder and housing.

Making a choice for a new lock

There are many options to choose from when it comes time to pick a new lock. Consider different kinds of locks, and select one that fits your door's style. Take into consideration the backset, which is the distance between the edge and the middle of lock hole. Also consider the cross bore, which is a small hole in the middle of your door frame. Also, ensure that you choose a lock that will be able to fit the door's thickness and swing.

The majority of door locks are evaluated by BHMA and the American Nationau should also reinstall the bracket that connects the cylinder with the stem of the lock indicator and this can be done by removing three tabs on the back of the cylinder with needle-nose pliers. Then, you can attach the second bracket to the back of the cylinder. Then, you need to reinstall the strike plate and latch plate as well as the retaining ring that is attached to the top lock the cylinder.

Installing a new lock

If you're replacing an existing lock, you should start by measuring the width of the door. Most locksets for residential use come with a thickness of 3/8 to 1 3/4 inches. If your door is more thick it will require a thick door kit that includes longer screws as well as an extended tail piece (for door knobs) or spindle extensions (for deadbolts).

Most replacement locks for double glazed windows come with a thorough installation guide to help you. Be sure to read the instructions thoroughly before beginning the process to ensure that you've followed all the steps. The booklet will also give you an idea of the level of expertise required to accomplish the task. You may want to ask a person who has worked with double glazing window locks repairs for assistance if are changing a lock the first time.

Before installing the new lock, it's recommended to tape over the openings of the old hardware. This will prevent the screws from falling through the holes, and protect any tiles you may have installed. It also shields your tiles from any damage caused by dirt, rust and grime. SECURAM Touch comes with a strip painter's tape designed to be used for this purpose, however you can also use gaffer's tape as well as masking tape if you have it available.

After you have removed the screws that hold the lock's interior to its exterior then take the lock off immediately. This should be done swiftly to prevent the lock from accidentally closing and damaging the mechanism.

Fit the new latch bolt into the upper cross bore of your new lock, if it comes with one. Be sure to put it in the correct place that is usually marked by an illustration on the faceplate. Then, place the latch plate on top of the bolt and secure it in the correct position.

Finally, screw in the deadbolt and strike plate to the door jamb. Check the deadbolt several times by throwing it to ensure it is extending into the strike plate. If you're using an electronic smart lock, make certain to follow the instructions for programming it. This involves downloading an application, entering your email address, confirming your identity, and then connecting to the wireless network to add your device.