Sliding Patio Doors Repair

It is possible for sliding patio doors to become difficult to open and close. This could be due to a number of issues, such as dirty tracks or misaligned rollers.

Clean the track first and making sure that the rollers are lubricated. You can also adjust the rollers by using the adjustment holes on the bottom side of the door panel that can be moved.

Tracks that are damaged or dirty

A sliding door that doesn't slide as it should can be due to an unclean or damaged track. Over time, dirt, grit and even rust can accumulate, preventing the track from moving smoothly. The solution is a thorough cleaning using the use of a brush and mild detergent. This job should be done regularly to ensure smooth operation and to prevent expensive repairs in the future.

A leaky door is a common problem that requires immediate attention to avoid the growth of mold, water damage and structural damage. The problem is often caused by worn weather strips and a misaligned doors. This can be rectified by replacing the old weather stripping and aligning the doors.

Rollers that veer off the track are a frequent issue that can be repaired with a simple DIY work. This is a task that can be challenging so you may need a helper to help you. To move the rollers around, stand inside the house and lean one of the panels towards you. After lifting the panel off the bottom track, you'll need set it on sawhorses to keep it from falling off. Then, loosen each roller's screws and remove them with the help of a screwdriver. You can now clean any dirt that is caught between the wheel and the tracks. Then, clean each wheel with denatured alcohol on a cloth. Reposition the wheels on their tracks and attach them once more.

If a part of the track is bent, it may be possible to straighten it using a rubber mallet or block of wood. However in the event that the bent portion is close to the hinges and is likely to cause further damage, you'll better off calling a professional for safety reasons.

Rollers that are misaligned

If your sliding door is experiencing difficulty sliding, it's most likely that the roller wheels are not aligned correctly. The wheels may be dirty or rusted and their bearings wear down. This causes friction between the bottom of the door and the track, causing it to grind or snag when it's shut or opened. This can also cause the sound of squeaking.

Fortunately it's a simple fix. You don't have to remove the door to get at the wheels, since they are located on a bracket that's adjustable. Use a screwdriver and find the adjustment holes on the frame (usually either side). Rotate the screws to control the wheels. Rotating the screw clockwise will raise the wheel while rotating it counterclockwise will lower it. Continue to adjust until the door moves smoothly and quietly when it is open or closed.

It is important to adjust the wheel before making adjustments to your latch. In order for the lock to function correctly the latch hooks need to be aligned with thesary to replace the entire track, which can be done easily with an universal replacement kit that is available at most major hardware stores. These kits are easy to install and will have your door working properly in no time.

It is essential to check your sliding door's frame and hardware for signs of wear and tear, such as loose screws or bolts. This is a straightforward and efficient DIY patio maintenance procedure that can be accomplished with an electric screwdriver. It is also important to lubricate your rollers and tracks to make sure they operate smoothly and to prevent premature wear.

Patio doors are often the main entrance to the backyard and outdoor living area for a majority of homeowners. As such, they need to to function properly to ensure the comfort of their homes and provide security. If you follow these easy DIY maintenance tips, homeowners can extend the lifespan of their sliding patio door and reduce costly repairs or replacements.

Faulty Handle

Sliding patio door are ideal for allowing you to get into your home and gain access to your backyard, however they can become difficult to operate when they are not aligned properly. A faulty handle can also cause the door to become stuck or difficult to open and close. repairing patio doors a damaged handle can be done at home.

In many instances the loose grip is a result of screws that have fallen out of the backplate. To fix this issue, simply tighten the two screws that are on the inside of the handle with the help of a screwdriver. If the handle is still loose it could be a sign that the threads have worn out and require replacement.

A broken latch may be the cause. It is more likely the latch will break if it is made of metal, instead of plastic. If the latch isn't turning or catching you can try oiling it first to see if it aids. If this does not work, you may need to replace the lock.

The handle, in turn, can become difficult to operate if it is broken or cracked. If this happens, you'll have to replace the handle with one that matches the style and design of your sliding patio doors.

Feldco can help you restore your patio doors to their former glory, whether they are brand new or outdated. We offer a wide range of high-quality patio doors in different sizes and styles. To learn more about our products, contact us now! We are proud to serve homeowners throughout Southern California, including Ventura County, Orange County & San Diego County.

Afflicted Weatherstripping

It's time to upgrade your weather stripping if see light around closed doors and windows, or sense a draft pulsing at the door or window. The strips form an airtight seal, which stops unwanted air, pests and water from entering the home. This keeps your conditioned and heated air inside, saving money on energy bills.

It may have lost its positive seal's bouncy and bouncy due to aging. This is easy to diagnose by using a dollar bill and putting it under the seal on top of the door frame and at the bottom of the door jamb where the two meet. If the dollar bill slides easily between the seal and the door easily then it's time to replace the weatherstripping.

It's tempting to remove only the worn section of weather stripping and then replace it, but this can result in cracks on the sides of the new piece and could cause problems with the seal in the future. It's much more effective to replace the entire stripping, so that you can be confident knowing your door is properly sealed again.

Follow our DIY guide for weather stripping and install the right material on your sliding patio door, and frame, to ensure a tight and lasting seal. It's a great option to fix your door and reduce your energy bill, so don't wait until it's too late. Your wallet and home will be thankful.